 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| H HiTRON UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 30 WATTS SWITCHING MODE POWER SUPPLIES HID35 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET UNIVERSAL SAFETY STANDARD AND INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac. Input Connector: M-T plug connector. Input Frequency: 47-63Hz. Inrush Current: 30.6A (rms) @230Vac. Input Current: 0.51A @115Vac, 0.28A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022 & FCC B. No Load Operation: No damage. Hold-up Time: 18.2mS @115Vac/ 69.6mS @230Vac. Earth Leakage: Less than 0.41mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 30W continuous. Output Connector: M-T plug connector. Line Regulation: Typ. 0.1%. Load Regulation: Vary with output voltage. Typ. 0.4%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in (Latch). Adjustability: Available at VO1. LED Indicator: Output indicating. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 115% max. load. Consult the factory for special OLP setting. Operating Temperature: -10 to +70C. Derating from +60 C to +70C by derating 2%/C. Storage Temperature: -25 to +85C. Temperature Coefficient: Typ. 0.03% /C. Cooling: Convection cooling for Ta < +60C. Moving air is request for Ta >+ 60C full load operation. Construction format: Enclosure metal box with DIN-clips format. MTBF Demonstrated: >380,000 hours at full load and 25C ambient conditions. GENERAL SPECIFICATION Efficiency: Typ. 76%. Switching Frequency: Fixed freq. 56K Hz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Peak transient typ. 150mV, recovers in 50.6mS following a 50% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 1.4 Watt/ Cubic Inch. Industrial Grade UL 508. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -27- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HID35-S050060 HID35-S120030 HID35-S240012 HID35-S480008 MAIN VO1 @ Typ. 6.0A 3.0A 1.2A 0.8A Volt. 5.0V 12.0V 24.0V 48.0V Peak 6.0A 3.0A 1.4A 0.9A Symbol: "@"Adjustable. " " OVP built-in . Remark: Peak load less than 60 sec. with duty cycle <10%. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 370.0g(13.04 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT ASSIGNMENT CNTR & PIN # AC-LINE P1-3(L) AC INPUT AC-NEUTRAL P1-2(N) AC-GROUND P1-1(G) SINGLE OUTPUT VO1 DC COM P2-1 P2-2 -28- |
Price & Availability of HID35
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |